Skip to content
ContractorsRanked

How much does a concrete driveway cost in Grapevine, TX?

US national rangeUpdated Prices checked October 20261 source

A concrete driveway costs $2,700 to $14,500 nationally, typical $6,400. We have no documented price index for Grapevine for this job, so this is the US national range from HomeAdvisor, checked October 2026.

US national range, not adjusted for this city

Low
$2,700
Typical
$6,400
High
$14,500

Get concrete driveway quotes in Grapevine

Concrete driveway cost in Grapevine, TX

We have no documented price index for Grapevine for this job, so the table shows the US national range.

Concrete driveway cost in Grapevine, TX
EstimateLowTypicalHighBasisChecked
US national range$2,700$6,400$14,500Per driveway: typical range of customer-reported projects (about $8 to $20 per sq ft) (HomeAdvisor)October 2026

What drives the cost of a concrete driveway

  1. Size

    Concrete is priced by the square foot, typically $8 to $20.

  2. Concrete type and thickness

    Thicker slabs and stamped or colored concrete cost more.

  3. Removal of the old driveway

    Tear-out and haul-away add cost.

  4. Labor

    Labor is about half the bill.

  5. Add-ons

    Rebar, heating, aprons and sealing add cost.

Permits and what's included in Grapevine

Permit note

Many towns require a permit for a new driveway or apron and set rules for the apron at the street. Check local code before work starts.

Rules are set locally; confirm with Grapevine’s building department.

What’s usually included

  • Excavation and gravel base
  • Forms and reinforcement in the agreed spec
  • Pouring and finishing

Scopes vary. Get the scope in writing on every quote.

Get concrete driveway quotes in Grapevine

Tell us about the job and we will pass it to local pros. Asking for quotes never changes how we rank anyone.

Two short steps: your name, then how to reach you. Free, and it never changes anyone’s rank.

Top-ranked concrete contractors in Grapevine

The top 3 of 727 concrete contractors we rank for Grapevine, TX, by CR Score. Paid placement never changes rank.

  1. #1
    Pinnacle Foundation Repair
    CR Score 645.0from 2,366 Google reviews
  2. #2
    Groundworks
    CR Score 624.9from 423 Google reviews
  3. #3
    Olshan Foundation Repair
    CR Score 614.8from 1,716 Google reviews

See all ranked concrete contractors in Grapevine

Concrete driveway cost in Grapevine: questions

How much does a concrete driveway cost in Grapevine, TX?

A concrete driveway costs $2,700 to $14,500 nationally, typical $6,400. We have no documented price index for Grapevine for this job, so this is the US national range from HomeAdvisor, checked October 2026.

Do I need a permit for a concrete driveway in Grapevine?

Many towns require a permit for a new driveway or apron and set rules for the apron at the street. Check local code before work starts. Rules are set locally, so confirm with Grapevine’s building department.

What affects the cost of a concrete driveway?

Size: concrete is priced by the square foot, typically $8 to $20. Concrete type and thickness: thicker slabs and stamped or colored concrete cost more. Removal of the old driveway: tear-out and haul-away add cost. Labor: labor is about half the bill.

How many concrete contractors serve Grapevine?

We rank 727 concrete contractors for Grapevine, TX by CR Score. Get at least three written quotes for the same scope.

What is usually included in the price?

Excavation and gravel base; Forms and reinforcement in the agreed spec; Pouring and finishing. Always get the scope in writing on the quote.

Sources

Checked October 2026. Figures are estimates, not quotes.

  1. HomeAdvisor: Concrete driveway cost · page updated June 20, 2026 · checked October 2026Primary source. Used for: Low, typical and high; drivers; apron note.
These are published estimates, checked October 2026. They are not quotes. Typical range shown: $2,700 to $14,500. Editorial policy

Related pages

More cost guides for Grapevine