Skip to content
ContractorsRanked

How much does a concrete driveway cost in Kingsville, TX?

US national rangeUpdated Prices checked October 20261 source

A concrete driveway costs $2,700 to $14,500 nationally, typical $6,400. We have no documented price index for Kingsville for this job, so this is the US national range from HomeAdvisor, checked October 2026.

US national range, not adjusted for this city

Low
$2,700
Typical
$6,400
High
$14,500

Get concrete driveway quotes in Kingsville

Concrete driveway cost in Kingsville, TX

We have no documented price index for Kingsville for this job, so the table shows the US national range.

Concrete driveway cost in Kingsville, TX
EstimateLowTypicalHighBasisChecked
US national range$2,700$6,400$14,500Per driveway: typical range of customer-reported projects (about $8 to $20 per sq ft) (HomeAdvisor)October 2026

What drives the cost of a concrete driveway

  1. Size

    Concrete is priced by the square foot, typically $8 to $20.

  2. Concrete type and thickness

    Thicker slabs and stamped or colored concrete cost more.

  3. Removal of the old driveway

    Tear-out and haul-away add cost.

  4. Labor

    Labor is about half the bill.

  5. Add-ons

    Rebar, heating, aprons and sealing add cost.

Permits and what's included in Kingsville

Permit note

Many towns require a permit for a new driveway or apron and set rules for the apron at the street. Check local code before work starts.

Rules are set locally; confirm with Kingsville’s building department.

What’s usually included

  • Excavation and gravel base
  • Forms and reinforcement in the agreed spec
  • Pouring and finishing

Scopes vary. Get the scope in writing on every quote.

Get concrete driveway quotes in Kingsville

Tell us about the job and we will pass it to local pros. Asking for quotes never changes how we rank anyone.

Two short steps: your name, then how to reach you. Free, and it never changes anyone’s rank.

Top-ranked concrete contractors in Kingsville

The top 3 of 11 concrete contractors we rank for Kingsville, TX, by CR Score. Paid placement never changes rank.

  1. #1
    H&M Concrete
    CR Score 605.0from 26 Google reviews
  2. #2
    Keen Decorative Concrete Llc.
    CR Score 595.0from 62 Google reviews
  3. #3
    Alice Foundation Repair
    CR Score 594.6from 18 Google reviews

See all ranked concrete contractors in Kingsville

Concrete driveway cost in Kingsville: questions

How much does a concrete driveway cost in Kingsville, TX?

A concrete driveway costs $2,700 to $14,500 nationally, typical $6,400. We have no documented price index for Kingsville for this job, so this is the US national range from HomeAdvisor, checked October 2026.

Do I need a permit for a concrete driveway in Kingsville?

Many towns require a permit for a new driveway or apron and set rules for the apron at the street. Check local code before work starts. Rules are set locally, so confirm with Kingsville’s building department.

What affects the cost of a concrete driveway?

Size: concrete is priced by the square foot, typically $8 to $20. Concrete type and thickness: thicker slabs and stamped or colored concrete cost more. Removal of the old driveway: tear-out and haul-away add cost. Labor: labor is about half the bill.

How many concrete contractors serve Kingsville?

We rank 11 concrete contractors for Kingsville, TX by CR Score. Get at least three written quotes for the same scope.

What is usually included in the price?

Excavation and gravel base; Forms and reinforcement in the agreed spec; Pouring and finishing. Always get the scope in writing on the quote.

Sources

Checked October 2026. Figures are estimates, not quotes.

  1. HomeAdvisor: Concrete driveway cost · page updated June 20, 2026 · checked October 2026Primary source. Used for: Low, typical and high; drivers; apron note.
These are published estimates, checked October 2026. They are not quotes. Typical range shown: $2,700 to $14,500. Editorial policy

Related pages