Skip to content
ContractorsRanked

How much does an electrical panel upgrade cost in Lanham-Seabrook, MD?

US national rangeUpdated Prices checked October 20261 source

An electrical panel upgrade costs $518 to $2,193 nationally, typical $1,347. We have no documented price index for Lanham-Seabrook for this job, so this is the US national range from HomeAdvisor, checked October 2026.

US national range, not adjusted for this city

Low
$518
Typical
$1,347
High
$2,193

Get electrical panel upgrade quotes in Lanham-Seabrook

Electrical panel upgrade cost in Lanham-Seabrook, MD

We have no documented price index for Lanham-Seabrook for this job, so the table shows the US national range.

Electrical panel upgrade cost in Lanham-Seabrook, MD
EstimateLowTypicalHighBasisChecked
US national range$518$1,347$2,193Per panel, installed; typical range of customer-reported jobs (HomeAdvisor)October 2026

Electrical panel upgrade cost by type or size

US national figures in USD, as published by each source.

Electrical panel upgrade cost by type or size
Type or sizePrice (USD)Source
100-amp panel$800 to $1,500HomeAdvisor
200-amp panel$1,300 to $2,000HomeAdvisor
400-amp panel$2,000 to $4,000HomeAdvisor

What drives the cost of an electrical panel upgrade

  1. Amperage

    Most homes need 100 to 200 amps; 400-amp service costs the most.

  2. Replace or relocate

    Moving a panel outdoors costs $1,500 to $4,000.

  3. Old fuse box or recalled panels

    Replacing a fuse box costs $1,500 to $4,500; Federal Pacific or Zinsco panels $1,500 to $4,000.

  4. Wiring age and circuits

    Older wiring and more circuits to move add labor.

  5. Drywall repair

    Patching around the panel runs about $1.50 to $3 per sq ft.

Permits and what's included in Lanham-Seabrook

Permit note

A permit is needed in most places, and the utility may need to disconnect service. Budget about $150 to $300 for permits and drywall repairs.

Rules are set locally; confirm with Lanham-Seabrook’s building department.

What’s usually included

  • The new panel and breakers
  • Labor to move circuits to the new panel
  • Coordination of the inspection

Scopes vary. Get the scope in writing on every quote.

Get electrical panel upgrade quotes in Lanham-Seabrook

Tell us about the job and we will pass it to local pros. Asking for quotes never changes how we rank anyone.

Two short steps: your name, then how to reach you. Free, and it never changes anyone’s rank.

Top-ranked electricians in Lanham-Seabrook

The top 3 of 684 electricians we rank for Lanham-Seabrook, MD, by CR Score. Paid placement never changes rank.

  1. #1
    Lilly Electric
    CR Score 625.0from 234 Google reviews
  2. #2
    Bailey & Shipp
    CR Score 625.0from 881 Google reviews
  3. #3
    Chesapeake Electric
    CR Score 624.9from 1,677 Google reviews

See all ranked electricians in Lanham-Seabrook

How to check an electrician's license in Maryland

In Maryland, Maryland State Board of Master Electricians licenses Electrical wiring and equipment work.

  1. Check that the status is active and the name matches the contract or truck.
  2. Ask for proof of insurance before work starts.

No chip usually means we have not matched a state record yet. Check the lookup yourself before you hire.

Guide checked October 2026. How we verify licenses

Electrical panel upgrade cost in Lanham-Seabrook: questions

How much does an electrical panel upgrade cost in Lanham-Seabrook, MD?

An electrical panel upgrade costs $518 to $2,193 nationally, typical $1,347. We have no documented price index for Lanham-Seabrook for this job, so this is the US national range from HomeAdvisor, checked October 2026.

Do I need a permit for an electrical panel upgrade in Lanham-Seabrook?

A permit is needed in most places, and the utility may need to disconnect service. Budget about $150 to $300 for permits and drywall repairs. Rules are set locally, so confirm with Lanham-Seabrook’s building department.

What affects the cost of an electrical panel upgrade?

Amperage: most homes need 100 to 200 amps; 400-amp service costs the most. Replace or relocate: moving a panel outdoors costs $1,500 to $4,000. Old fuse box or recalled panels: replacing a fuse box costs $1,500 to $4,500; Federal Pacific or Zinsco panels $1,500 to $4,000. Wiring age and circuits: older wiring and more circuits to move add labor.

How many electricians serve Lanham-Seabrook?

We rank 684 electricians for Lanham-Seabrook, MD by CR Score. Get at least three written quotes for the same scope.

What is usually included in the price?

The new panel and breakers; Labor to move circuits to the new panel; Coordination of the inspection. Always get the scope in writing on the quote.

Sources

Checked October 2026. Figures are estimates, not quotes.

  1. HomeAdvisor: Electrical panel upgrade cost · page updated June 17, 2026 · checked October 2026Primary source. Used for: Low, typical and high; prices by amperage; drivers; permit.
These are published estimates, checked October 2026. They are not quotes. Typical range shown: $518 to $2,193. Editorial policy

Related pages

More cost guides for Lanham-Seabrook