Skip to content
ContractorsRanked

How much does a concrete driveway cost in Sandy Hills, UT?

US national rangeUpdated Prices checked October 20261 source

A concrete driveway costs $2,700 to $14,500 nationally, typical $6,400. We have no documented price index for Sandy Hills for this job, so this is the US national range from HomeAdvisor, checked October 2026.

US national range, not adjusted for this city

Low
$2,700
Typical
$6,400
High
$14,500

Get concrete driveway quotes in Sandy Hills

Concrete driveway cost in Sandy Hills, UT

We have no documented price index for Sandy Hills for this job, so the table shows the US national range.

Concrete driveway cost in Sandy Hills, UT
EstimateLowTypicalHighBasisChecked
US national range$2,700$6,400$14,500Per driveway: typical range of customer-reported projects (about $8 to $20 per sq ft) (HomeAdvisor)October 2026

What drives the cost of a concrete driveway

  1. Size

    Concrete is priced by the square foot, typically $8 to $20.

  2. Concrete type and thickness

    Thicker slabs and stamped or colored concrete cost more.

  3. Removal of the old driveway

    Tear-out and haul-away add cost.

  4. Labor

    Labor is about half the bill.

  5. Add-ons

    Rebar, heating, aprons and sealing add cost.

Permits and what's included in Sandy Hills

Permit note

Many towns require a permit for a new driveway or apron and set rules for the apron at the street. Check local code before work starts.

Rules are set locally; confirm with Sandy Hills’s building department.

What’s usually included

  • Excavation and gravel base
  • Forms and reinforcement in the agreed spec
  • Pouring and finishing

Scopes vary. Get the scope in writing on every quote.

Get concrete driveway quotes in Sandy Hills

Tell us about the job and we will pass it to local pros. Asking for quotes never changes how we rank anyone.

Two short steps: your name, then how to reach you. Free, and it never changes anyone’s rank.

Top-ranked concrete contractors in Sandy Hills

The top 3 of 382 concrete contractors we rank for Sandy Hills, UT, by CR Score. Paid placement never changes rank.

  1. #1
    INTERMOUNTAIN CONCRETE CUTTING
    CR Score 615.0from 238 Google reviews
  2. #2
    Davenport Foundation Repair
    CR Score 614.9from 1,130 Google reviews
  3. #3
    Dirty Boys Concrete
    CR Score 604.8from 123 Google reviews

See all ranked concrete contractors in Sandy Hills

Concrete driveway cost in Sandy Hills: questions

How much does a concrete driveway cost in Sandy Hills, UT?

A concrete driveway costs $2,700 to $14,500 nationally, typical $6,400. We have no documented price index for Sandy Hills for this job, so this is the US national range from HomeAdvisor, checked October 2026.

Do I need a permit for a concrete driveway in Sandy Hills?

Many towns require a permit for a new driveway or apron and set rules for the apron at the street. Check local code before work starts. Rules are set locally, so confirm with Sandy Hills’s building department.

What affects the cost of a concrete driveway?

Size: concrete is priced by the square foot, typically $8 to $20. Concrete type and thickness: thicker slabs and stamped or colored concrete cost more. Removal of the old driveway: tear-out and haul-away add cost. Labor: labor is about half the bill.

How many concrete contractors serve Sandy Hills?

We rank 382 concrete contractors for Sandy Hills, UT by CR Score. Get at least three written quotes for the same scope.

What is usually included in the price?

Excavation and gravel base; Forms and reinforcement in the agreed spec; Pouring and finishing. Always get the scope in writing on the quote.

Sources

Checked October 2026. Figures are estimates, not quotes.

  1. HomeAdvisor: Concrete driveway cost · page updated June 20, 2026 · checked October 2026Primary source. Used for: Low, typical and high; drivers; apron note.
These are published estimates, checked October 2026. They are not quotes. Typical range shown: $2,700 to $14,500. Editorial policy

Related pages

More cost guides for Sandy Hills