Skip to content
ContractorsRanked

How much does a furnace replacement cost in Sandy Hills, UT?

US national rangeUpdated Prices checked October 20261 source

A furnace replacement costs $2,823 to $6,896 nationally, typical $4,814. We have no documented price index for Sandy Hills for this job, so this is the US national range from HomeAdvisor, checked October 2026.

US national range, not adjusted for this city

Low
$2,823
Typical
$4,814
High
$6,896

Get furnace replacement quotes in Sandy Hills

Furnace replacement cost in Sandy Hills, UT

We have no documented price index for Sandy Hills for this job, so the table shows the US national range.

Furnace replacement cost in Sandy Hills, UT
EstimateLowTypicalHighBasisChecked
US national range$2,823$4,814$6,896Per system, installed; typical range of customer-reported jobs (HomeAdvisor)October 2026

Furnace replacement cost by type or size

US national figures in USD, as published by each source.

Furnace replacement cost by type or size
Type or sizePrice (USD)Source
Electric furnace$2,000 to $7,000HomeAdvisor
Gas furnace$3,800 to $10,000HomeAdvisor
Oil furnace$6,750 to $10,000HomeAdvisor

What drives the cost of a furnace replacement

  1. Fuel type

    Electric furnaces cost least to install; oil costs the most.

  2. Efficiency rating

    High-AFUE furnaces cost more up front.

  3. Home size

    Furnaces are sized at roughly 30 to 60 BTUs per square foot.

  4. Climate

    Colder regions need more capacity.

  5. Removal of the old unit

    Removal and disposal typically add $150 to $330.

Permits and what's included in Sandy Hills

Permit note

Furnace replacement usually needs a mechanical permit, and gas work may need its own. Ask your local building department for the fee.

Rules are set locally; confirm with Sandy Hills’s building department.

What’s usually included

  • The new furnace
  • Connection to existing ducts, venting and fuel supply
  • Startup and testing

Scopes vary. Get the scope in writing on every quote.

Get furnace replacement quotes in Sandy Hills

Tell us about the job and we will pass it to local pros. Asking for quotes never changes how we rank anyone.

Two short steps: your name, then how to reach you. Free, and it never changes anyone’s rank.

Top-ranked HVAC contractors in Sandy Hills

The top 3 of 574 HVAC contractors we rank for Sandy Hills, UT, by CR Score. Paid placement never changes rank.

  1. #1
    Scott Hale Plumbing, Drains, Heating & Air
    CR Score 654.8from 6,863 Google reviews
  2. #2
    Barlow Service Experts
    CR Score 654.9from 3,142 Google reviews
  3. #3
    YES! Air Conditioning, Heating, Plumbing and Electric
    CR Score 644.8from 1,450 Google reviews

See all ranked HVAC contractors in Sandy Hills

How to check an HVAC contractor's license in Utah

In Utah, Utah Division of Professional Licensing (DOPL) licenses Heating, ventilation, air conditioning and refrigeration work.

  1. Check that the status is active and the name matches the contract or truck.
  2. Ask for proof of insurance before work starts.

No chip usually means we have not matched a state record yet. Check the lookup yourself before you hire.

Guide checked October 2026. How we verify licenses

Furnace replacement cost in Sandy Hills: questions

How much does a furnace replacement cost in Sandy Hills, UT?

A furnace replacement costs $2,823 to $6,896 nationally, typical $4,814. We have no documented price index for Sandy Hills for this job, so this is the US national range from HomeAdvisor, checked October 2026.

Do I need a permit for a furnace replacement in Sandy Hills?

Furnace replacement usually needs a mechanical permit, and gas work may need its own. Ask your local building department for the fee. Rules are set locally, so confirm with Sandy Hills’s building department.

What affects the cost of a furnace replacement?

Fuel type: electric furnaces cost least to install; oil costs the most. Efficiency rating: high-AFUE furnaces cost more up front. Home size: furnaces are sized at roughly 30 to 60 BTUs per square foot. Climate: colder regions need more capacity.

How many HVAC contractors serve Sandy Hills?

We rank 574 HVAC contractors for Sandy Hills, UT by CR Score. Get at least three written quotes for the same scope.

What is usually included in the price?

The new furnace; Connection to existing ducts, venting and fuel supply; Startup and testing. Always get the scope in writing on the quote.

Sources

Checked October 2026. Figures are estimates, not quotes.

  1. HomeAdvisor: Furnace replacement cost · page updated June 17, 2026 · checked October 2026Primary source. Used for: Low, typical and high; prices by fuel; drivers.
These are published estimates, checked October 2026. They are not quotes. Typical range shown: $2,823 to $6,896. Editorial policy

Related pages

More cost guides for Sandy Hills